How to operate the drilling rig screw air compressor correctly? get a quotation for a water well drilling rig.
As we all know, the screw air compressor is very important for DTH hydraulic drilling rig and water well drilling rig. It is a source of power for drilling boreholes.
The right way to use water well drilling rig screw air compressor is very important. Failing to pay attention to the operation can easily cause failure. This article is mainly to introduce the use of water well drilling rig screw air compressor.
Check the products list for our screw air compressor.
The right way for the daily use of screw air compressor:
1, Before starting, check the oil and gas separator, slightly open the oil leakage valve under the oil and gas separator, and discharge the possible condensate water. Make sure that there is no condensate water, then tighten the leakage valve. Open the screw air compressor air supply valve.
2, Set the operating parameters, then press the start button.
3, When water well drilling rig screw air compressor starts, observe whether there are abnormal vibration, noise, oil leakage, and the sufficiency of lubricant.
4, Close the cover door to control the noise of the screw compressor. Make ensure the normal flow of cooling air.
5, Slowly close the gas supply valve to check whether the water well screw air compressor runs according to the settings.
6, Check the parameters such as pressure, exhaust temperature, and electrical indicators are normal.
7, The pressure of water cooling unit needs to check, adjust the water ball valve to keep the temperature of the cooling unit within the normal range.
8, When the water well drilling rig screw air compressor runs for the first 1 hour, please carefully check the condition. Then check the screw air compressor after every 6 hours. If there are abnormalities, shutdown, and repair.
9, After the first running, shut down the water well drilling rig screw air compressor, check whether it lubricants; and if the nut comes to loose.